Specially blended combination of asphalt and metallic aluminum pigment. Reflects the sun's heat and UV rays. A single application provides a bright, highly-reflective, weather-resistant surface. Economical 1 coat coverage - can be spray applied. Prolongs roof life by reflecting UV rays. Cooler interior, lower air conditioning costs. Not to be sold in Southern California. Can be used on barns, mobile homes, garages, offices, industrial buildings, and factories. The type of roof systems included for application are built up asphalt, tar, prepared roll roofing, weatherized iron, and tin. Stir thoroughly before and during application. Power mixing is recommended for color uniformity. Do not dilute. Apply with a good quality roof brush, long-napped roller, or spray gun. Avoid over-application. Do not apply if there is a threat of rain, dew, or frost within 48 hours. Surface must be clean and completely dry. Repair cracks, breaks, tears, and holes by embedding glass reinforcing fabric between 2 heavy coats of plastic roof cement, applied over and at least 2" beyond the area to be repaired. Allow repairs to cure 30 days before coating. Metal and weathered asphalt roofing should 1st be coated with asphalt emulsion. Prime metal flashings with asphalt primer. Covers approximately 75 to 300 Sq. Ft. per Gal. Quantities needed may vary according to the type, age, and condition of the surface. ASTM D-2824 Type 1. 1 year warranty.